- How do I get my sprocket to print?
- How do you reset a sprocket?
- How do I update my HP sprocket firmware?
- What does the orange light on my sprocket mean?
- Why is my printer connected but not printing?
- How do I get my HP printer to print?
- Why is my sprocket light red?
- Why won’t my sprocket 200 turn on?
- What do I do if my HP printer won’t print?
- How do I connect my iphone to my HP sprocket printer?
- Does the HP sprocket only print stickers?
- How long does sprocket battery last?
- How do I connect my HP sprocket?
- How do you remove a sprocket from a printer?
- How do I print an HP sprocket?
- Can sprocket print while charging?
- What software do I need to scan on my HP printer?
How do I get my sprocket to print?
Step 3: Confirm mobile device settingsTurn on the Sprocket.On your mobile device, open the Bluetooth settings menu, and then make sure Bluetooth is enabled.Check the settings on your Android or iOS device.
On your mobile device, open the HP sprocket app.Tap the Menu icon , tap sprocket, and then tap Manage Printers..
How do you reset a sprocket?
How do I reset my printer?Turn on the printer.Locate the Reset button near the charging port.Gently insert the straight pin into the reset button access point, and then press the Reset button for 3 seconds. The printer resets and turns off.Turn on the printer.
How do I update my HP sprocket firmware?
On your mobile device, make sure it is connected to the Internet, and then open the HP Sprocket app. If there is a firmware update available, a firmware update screen displays. Follow the on-screen prompts to complete the update. Update the software on your mobile device.
What does the orange light on my sprocket mean?
Amber Charging, 90-99% charged Device is nearly charged. Red Low and Critically Low Charge Device has a low battery and is charging. The color of the Status LED Indicator Light can be personalized in the sprocket app. … If the battery is Critically Low or drained, you cannot print.
Why is my printer connected but not printing?
First, make sure the printer is on and has paper in the tray. … Next, check to make sure the printer cable is properly connected to both the computer and the printer. If you still can’t print, check to make sure the printer is not set to offline mode. Go to Start, Printers and Faxes.
How do I get my HP printer to print?
How to printSelect the file you want to print and open the file so it appears on your computer screen.Press the Ctrl and P buttons on your keyboard at the same time.Once the printing pop-up menu appears on your computer screen, select the printer you intend to send the job to.If needed, modify your print settings.More items…
Why is my sprocket light red?
If the Status Indicator light is blinking red, the printer is in an error state, and an error message displays on the HP sprocket app. For more information, go to Blinking Red Status Indicator Light. If the Charging Indicator light is blinking red, the battery has a very low charge, or is unable to charge.
Why won’t my sprocket 200 turn on?
If the printer does not turn on when you press the Power button, reset the printer to clear any errors. Remove the paper cover. Locate the Reset button. With a paperclip or pin, press and hold the Reset button for 3 seconds.
What do I do if my HP printer won’t print?
Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.
How do I connect my iphone to my HP sprocket printer?
Step 2: Pair the printer and mobile device After the app installs, turn on the printer. On your mobile device, open the Bluetooth settings menu, and then make sure Bluetooth is enabled. Open the HP sprocket app. If a Welcome screen displays, tap the setup option, and then follow the on-screen instructions.
Does the HP sprocket only print stickers?
Let’s start with the basics. The Sprocket is rechargeable through a Micro USB, connects to your phone through Bluetooth, and requires Zink / HP photo paper to work. … Every sheet of paper is a sticker, too.
How long does sprocket battery last?
Answers. Best answer: The Sprocket takes approximately 2 hours to fully charge. I charged it yesterday, then had it on for 4 hours, even after printing 5 pictures. It still had over 35% battery life.
How do I connect my HP sprocket?
Be sure Bluetooth is turned on for your mobile device or tablet, and then open the sprocket app. Select the Main Menu in the upper left-hand corner. 3. Tap sprocket to pair your printer with your mobile device or tablet.
How do you remove a sprocket from a printer?
Tap sprocket, and then tap Printer Settings. Tap Auto Off, and then select when you want the printer to turn off.
How do I print an HP sprocket?
Tap the Frame icon to select a frame to print. Select the frame you want to print. Android: Tap and drag the dot to the time of the frame you want to print, and then tap the Checkmark . iOS: Tap and drag the square to the frame you want to print, and then tap the Checkmark .
Can sprocket print while charging?
Printer can be used while charging. Fully charged Device is fully charged. Powering on/Receiving print job LED flashes white when powering on and when receiving a print job. Printer error When a print error occurs, the LED will flash red.
What software do I need to scan on my HP printer?
If your printer does not have a document feeder and the scanner glass does not support the size of your original, use the HP Smart app to scan with your mobile device camera or computer webcam. For more information, go to Using the HP Smart App (Android, iOS) or Using the HP Smart App (Windows 10).