Quick Answer: How Do I Turn On My HP Sprocket?

How do I turn on my HP sprocket 200?


Press and hold the Power Button until the Status LED Indicator Light turns white when fully powered on.


Be sure Bluetooth is turned on for your mobile device or tablet and then open the sprocket app..

Where is the reset button on HP sprocket?

How do I reset my printer?Turn on the printer.Locate the Reset button near the charging port.Gently insert the straight pin into the reset button access point, and then press the Reset button for 3 seconds. The printer resets and turns off.Turn on the printer.

Why is my HP sprocket not turning on?

Step 1: Turn on the Sprocket and check battery status The Sprocket might have turned off or the battery might need to be charged. Use the HP sprocket app to check the battery status, and then adjust the Auto Off setting. Press and hold the Power button to turn on the Sprocket, and then open the HP sprocket app.

Does a sprocket run out of ink?

Best answer: It does not use any ink. Uses ZINK paper which is a paper that is an advanced composite material with cyan, yellow, and magenta dye crystals embedded inside and a protective polymer overcoat layer outside.

How do I connect my HP sprocket 200 to my Iphone?

Make sure the Sprocket is on and your mobile device is connected to the Internet. On your mobile device, open the HP sprocket app. Tap the Menu icon , and then tap sprocket. Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.

How do you update a sprocket?

On your mobile device, make sure it is connected to the Internet, and then open the HP Sprocket app. If there is a firmware update available, a firmware update screen displays. Follow the on-screen prompts to complete the update. Update the software on your mobile device.

Do you have to put ink in a HP sprocket?

The Sprocket is rechargeable through a Micro USB, connects to your phone through Bluetooth, and requires Zink / HP photo paper to work. That means you don’t need ink because Zink’s proprietary printing technology puts crystals on every sheet that show up as specific colors when they’re heated up.

How do you open a sprocket plus?

Open the HP sprocket app. If a Welcome screen displays, tap the setup option, and then follow the on-screen instructions. Tap the Menu icon , tap sprocket, and then tap Manage Printers. A list of available Sprockets displays.

How long does a sprocket take to charge?

90 minutesHP recommends you charge the printer up to 90 minutes or until the power light turns green. However, you can charge the printer for longer than 90 minutes, which might increase battery life. Use an external battery charger.

How do I connect my HP printer sprocket?

Go to the HP Sprocket (in English) homepage, and then follow the on-screen instructions to download and install the app. After the app installs, turn on the printer. On your mobile device, open the Bluetooth settings menu, and then make sure Bluetooth is enabled. Open the HP sprocket app.

Why won’t my sprocket 200 turn on?

If the printer does not turn on when you press the Power button, reset the printer to clear any errors. Remove the paper cover. Locate the Reset button. With a paperclip or pin, press and hold the Reset button for 3 seconds.

Does Zink paper expire?

However, he confirmed that the the Zink paper DOES NOT EXPIRE, because the crystals on the paper are activated by the heat from the printer, and they do not deteriorate in any other way (he really sounded like he knew what he was talking about).

Why is my sprocket light red?

If the Status Indicator light is blinking red, the printer is in an error state, and an error message displays on the HP sprocket app. For more information, go to Blinking Red Status Indicator Light. If the Charging Indicator light is blinking red, the battery has a very low charge, or is unable to charge.

Does Zink paper fade?

The printer vaporizes the dye and it sublimates onto the paper. … They will fade eventually because dyes are less UV resistant than pigments, but so will minilab prints (around 10-30 years for Kodak paper, 70 years for Fuji). Zink printers are small novelty printers, like the Fuji Instax or Selphy.

Why are my HP sprocket pictures bad quality?

Dirt and debris on the paper path rollers can cause print quality issues. Use the colored Print Quality Card (formerly the Smartsheet) from the same pack of HP ZINK photo paper currently loaded in the Sprocket to clean the paper path rollers.

Can sprocket print while charging?

Printer can be used while charging. Fully charged Device is fully charged. Powering on/Receiving print job LED flashes white when powering on and when receiving a print job.

How do I reset my HP sprocket plus?

How do I reset my printer?Turn on the printer.Remove the paper cover by sliding it away from the output slot, and then set it aside. … Locate the Reset button.Gently insert a straight pin into the reset button access point, and then press and hold the Reset button for 3 seconds. … Turn on the printer.